When direct injection came onto the scene 10 to 15 years ago, it seemed to cure many of the world’s problems, offering more power and improved fuel economy. Where traditional injection setups squirt the fuel into the intake port, direct injection delivers a very precise amount of fuel right into the combustionchamber.
But a problem tended to crop up: carbon buildup in the intake manifold and on the backs of the valves, especially the intake valves. Too much buildup, as you can imagine, isn’t good for engine health or efficiency. Regular maintenance for many owners of direct-injected engines included walnut shell blasting, including the laborious disassembly of the top end of theengine.
Two factors, notes Zachary J. Santner, senior specialist of quality at Sunoco, contribute to that buildup: oil that has seeped past the valve seals and the oily crankcase blowby vapors that are rerouted back into the combustion chamber. When those hydrocarbons are super-heated yet not burned, they form solids via the co*kingprocess.
In a traditional, port-injected engine, Santner continues, the incoming fuel cleans away those oil deposits. A direct-injected engine, of course, lacks thatfeature.
So, what to do? Use of a Top Tier fuel, like all the pump products from Sunoco, he continues, will still help clean several major parts of the engine–specifically the injectors, combustion chamber and pistontops.
In addition to walnut shell blasting of the intake and valves, Santner notes some other measures that can help. While he has no direct experience, he does note that motor oils specifically designed for direct-injected engines are coming onto the market. These products claim to be more resistant to the co*kingprocess.
Solvent cleaners also exist, and Santner notes that the safety data sheet for the GDI IVD Intake Valve & Turbo Cleaner from CRC Industries lists a rather large dose of detergent. The product also contains a carrier suitable for delivering that solvent to the right places, the intake manifold and backs of thevalves.
More Fuel Tips from Grassroots Motorsports:
• What separates a race fuel from a street fuel?
• The science of high-octane fuel
• What happens to gasoline as it ages?
• Ethanol or not for your gasoline?
• Does all E85 contain 85% ethanol?
• Why does E85 run cooler and make more power?
• More oxygen for more power?
• Why not methanol?
• What's lead got to do with it?
• Picking the proper gas regarding lead and oxygen
• Narrowing the fuel field
• 91 vs. 93 octane
• Why top tier street fuels matter
• Fueling your boosted engine
• What fuel to feed a rotary engine?
• Lawn and garden equipment needs the proper fuel, too
• What is vapor pressure of gasoline and why should you care?
• What is specific gravity of gasoline and why should you care?
• Adding additives to your fuel. | Yes or no?
• What's really in that fuel additive?
• Antioxidants, fuel stabilizers, and you
• Winter fuels for wintertime
• Fuels for a post-apocalyptic world
• Need help selecting a fuel? Call the experts.
• Gas station basics that aren’t that basic
• How dirty fuel can lead to a dirty engine
• Is all premium gas the same?
• How to buy and store race fuel
• Toluene or Xylene: Legit low-buck octane boosters?
• How to make your own ethanol blend
• Do fuel additives actually work?
• Where does gasoline comes from?
• How to stretch the gas budget?
• How fresh is that fuel?
• How to handle gasoline safely and remain fire-free
• Expert tips on finding and transporting race fuel
• How to make the jump into the world of race fuels
• How to clean intake deposits in direct-injection engines
More Fuel Facts from Classic Motorsports:
• What is race gas?
• Which race fuel is right for you?
• Buying and storing race fuel
• The right fuel in the fall might help your engine start in the spring
• Fuels for storage: good, better, best
• How much octane is enough for my classic?
• 93-octane not enough? Solutions exist.
• Can you blend fuels to get the right mix?
• Tuning for today's oxygenated fuels
• Picking the proper gas
• How to choose a quality gas station
• Why is there ethanol in our gasoline?
• Understanding additives
• Why not avgas in your car?
• Water is great for your plants, not so much for your fuel system
• Gasoline makes a terrific degreaser, yet this practice can kill you
• Are high-octane fuels more stable?
• Ideal fuels for wintertime storage
• What ever happened to leaded gasoline?
• Homebrewed, non-ethanol fuel: A potentially deadly DIY
• Was yesterday's gasoline better?
• Cars that sit need clean fuel, too
• Is all that alcohol good or bad?
• Does the octane number in your manual match the one on the pump?
• What's the right fuel for forced-induction cars?
• What's in aftermarket additives anyway?
• The perils of running rich
• Should you fill up your classic before parking for the winter?
• Do all gas stations offer the same quality of fuel?
• How to know if you are using the correct fuel
• How to keep carbon deposits out of your engine
Join Free Join our community to easily find more Fuel Tips, Sponsored Content, Fuel Facts, Direct Injection and Carbon articles.
More like this
Comments
David S. Wallens Editorial Director
3/29/23 9:13 a.m.
So, those with GDI engines, what are you finding? All going well? Using some kind of intake cleaner?Is walnut shell blasting part of your maintenance schedule?
alfadriver MegaDork
3/29/23 9:37 a.m.
In reply to David S. Wallens :
Not every DI engine suffer from intake system deposits the same. Some are really bad some barely have any.
Trent PowerDork
3/29/23 10:08 a.m.
With R56 MINI's the answer is a catch can system.
I hate to say it but "Staff Writer" really phoned that article in. I clicked the link genuinely interested in a solution and was instead told to buy gasoline that won't have any effect and then a "perhaps these chemicals we have no experience with might help"
Toyman! GRM+ Memberand MegaDork
3/29/23 10:14 a.m.
Cool, another Sunoco advertisem*nt.
WonkoTheSane GRM+ Memberand UltraDork
3/29/23 1:28 p.m.
Trent said:With R56 MINI's the answer is a catch can system.
I hate to say it but "Staff Writer" really phoned that article in. I clicked the link genuinely interested in a solution and was instead told to buy gasoline that won't have any effect and then a "perhaps these chemicals we have no experience with might help"
Agreed.
People: What's the solution to DI engine sludge build up?
"Staff Writer:" lol ¯\_(ツ)_/¯
Berck Reader
3/29/23 2:28 p.m.
About as good advice as: Buy a new car that has both direct and port injection so you get the best of both worlds:)
bobzilla MegaDork
3/29/23 4:19 p.m.
In the Korean world catch cans are a lifesaver. Seafoam through the pcv hose helps. On some honda vehicles a friend that runs an independent shop does he walnut shell treatment but pulling the intakes.
Monitor oil consumption. Use a catch can if you can and keep a fresh PCV valve on. If it's been ignored too long original seafoam or GM Top engine cleaner works decently but makes a helluva smoke show. Finally you can have a shop (or if you're adventurous) use walnut shells to blast the valves/ports.
EDIT: maybe I need to start writing for y'all
Tom_Spangler (Forum Supporter) GRM+ Memberand UltimaDork
3/29/23 4:37 p.m.
I've run a couple of cans of this stuff through the Expedition:
It's honestly hard to know how much of a difference it's made without getting a borescope and peeking down into the heads. At 85k miles, the truck still runs great, makes (seemingly) full power and gets the same crappy fuel economy it always has. The one symptom of buildup that it does have is that it idles rough when it's cold. I've looked into walnut blasting. Interestingly, it was easier for me to find places that do do that for VW and BMW engines around here than my Ecoboost 3.5, which is in approximately a zillion vehicles in the Detroit area.
Displaying 1-8 of 8 commentsView all comments on the GRM forums
You'll need to log in to post.
